What is Pivot shower encloure:
A
pivot shower enclosure is a type of shower enclosure that is hinged at the bottom and pivots open from the center. The door swings both inward and outward and is attached to the top and bottom of the enclosure. This type of
Pivot shower encloures Manufacturers is useful for those who prefer a wider entrance and want to avoid a sliding or swinging door.
How to Pivot shower encloure:
1.Measure the shower opening to ensure that the pivot shower enclosure will fit properly.
2.Install the bottom track onto the shower curb or base. Make sure the track is level.
3.Place the pivot jamb against the wall, aligning it with the bottom track. Secure the jamb to the wall using screws and a level to ensure it is straight.
4.Insert the pivot hinge into the top of the jamb.
5.Attach the door to the pivot hinge using screws.
6.Install the strike jamb to the opposite wall, ensuring it is level.
7.Check the fit of the door by swinging it open and closed. Adjust the pivot hinge if necessary.
8.Install any additional hardware, such as handles or towel bars.
9.Seal the enclosure using silicone caulk or a shower door sealant to prevent water from leaking out.
10.Clean up any excess silicone or caulk, and let it dry according to the manufacturer's instructions.